Fuel Rail (UFRID®)
As an approach for reducing fuel evaporative emission, adopting fuel returnless system on gasoline engine vehicles are considerably increased. The system adopted will cause larger fuel pressure pulsation and therefore pulsation dampening should be required on the fuel rail.
As UFRID® possesses effective self-dampening capability to the pulsation with rail’s own self, unpleasant vehicle interior noise induced by the pulsation could be prevented without pulsation dampener. Due to giving much smaller volume elasticity on the rail than those of fuel, the rail absorbs pulsation energy generated at gasoline injection. Balance of stiffness (i.e. volume elasticity) and strength on the rail is optimized so that we can obtain both the required energy absorption performance and necessary mechanical strength on the rail.
When applying UFRID® in your system, you should enjoy the reductions of system cost and weight because the pulsation dampener can be eliminated from the system.
■ Cautionary Note
The information shown on this page is intended to describe typical characteristics and performance that our products might possess; but not to grant any warranty in any form.
Please be aware, depending on use purposes, use environments and use conditions, the generic information may not be applicable in certain cases.
USUI may also modify or delete any of the products information without advance notice. For the latest or further information, please contact us.